Affiliate note. We may earn a commission when you buy through links on this page, at no extra cost to you. It never changes our picks. How we make money.
Our picks
Best for 7-inch printers
Elegoo Mercury Plus 3.0
Two-in-1 wash and cure sized for small and mid resin printers.
Best for Mars 5 Ultra and Photon Mono 4 owners
Key specs manufacturer data
| Type | 2-in-1: wash then cure in one unit |
|---|---|
| Wash | Rotating container with propeller |
| Cure | UV light with rotating turntable |
Why it stands out
- One footprint for both steps
- Good match for Mars-class build plates
- Plate can be washed still attached
Trade-offs
- Check tank size against 10-inch printers
- IPA still needs proper disposal
Spec sources: elegoo.com
Best for larger plates
Anycubic Wash & Cure 3 Plus
Larger two-in-1 station for bigger build plates.
Best for Saturn-class printer owners
Key specs manufacturer data
| Type | 2-in-1: wash then cure in one unit |
|---|---|
| Size | Larger 'Plus' container for bigger plates |
| Cure | UV light with rotating turntable |
Why it stands out
- Bigger container suits 10-inch-class printers
- Single-unit workflow
Trade-offs
- Large to store
- Verify container size against your plate before buying
Spec sources: store.anycubic.com
Safe washing routine
- Wear nitrile gloves and eye protection.
- Wash in isopropyl alcohol (or a dedicated resin cleaner) for the time your resin maker recommends.
- Let parts dry completely before curing; trapped alcohol can cause clouding.
- Cure briefly, then check. Remove supports before or after curing depending on resin brittleness.
- Leave used alcohol in sunlight so dissolved resin cures and settles, then dispose of it according to local rules.
Frequently asked questions
Do I need a wash and cure station?
Not strictly: containers of isopropyl alcohol and a UV lamp or sunlight work. A station makes the process faster, more consistent and better contained.
How do I choose the size?
Match the wash container to your build plate. Seven-inch printers fit standard stations; 10-inch printers like the Saturn 4 Ultra 16K generally need a larger "Plus"-class unit. Check the dimensions before buying.
Can I over-cure resin prints?
Yes. Over-curing can make parts brittle or yellowed. Follow your resin maker's guidance and start with short cures.